Grand Designs International Ltd

Condensation is created when air is saturated with excess water, which we feel is an increased level of humidity. As the air cannot hold the excess water it disposes of it by condensing it on any convenient surface that has a lower temperature than the air itself. Initially, we ensure that the problem is due to condensation and not some other source. Controlling water production and especially ventilation and heating.  The correct amount of humidity in the home is relative to the outdoor temperature.

Indoor temperature should maintained at 70° F,

If you operate room or central forced air humidifiers it is important to check and clean them regularly. One of the common causes of over humidification in homes are poorly maintained humidifiers.

The most common rising dampness in this building is due to the overflow pipe drip outside. The overflow drip saturates the wall completely and wet. The wall can penetrate inside the cavity and that can cause dampness in this building.

Another problem overflow pipe may be drip inside the cavity wall and the water can drip inside the cavity, splash the foundation and the inner and outer leaf of the cavity will penetrate the dam in the building.

The Ground Level below the DPC penetrates the wall and foundation as shown in the index below and causes of the damp.

Solution:

The water overflow pipe needs to be replaced and extended to the main gully, the mouse bills need to be clear and closed properly, and the ground level should be below the DPC up to 150mm.

Create 3D visualization for rear ground floor extension and internal renovation to our client property. All of the designs that we produce are unique and created bespoke for each client. We listen to your requirements and your must-haves. We encourage you to think of new ideas and how they might integrate with ideas that you want already. 3D visuals are a great way to see designs in reality before you make any commitments to the design. This can save you money in the long run, as it reduces the chances of changing your mind later down the line.

The most common increase in dampness occurs due to vertical damp rising through the wall when there is no damp-proof path or the old finish has been damaged. Over the years, rising water causes decorative damage and often the floors and baseboards rot. In addition, hygroscopic salts in rising groundwater also contaminate walls/finishings.

Solution:

Clean all plants, leaves, and mud from the gutter. Look for clogged downpipes (best done in heavy rain to spot leaking connections). Remove vegetation from behind the downpipe. Install bird/leaf guards on the top of soil pipes and rainwater outlets to prevent blockages. Repair gutters if the slope is wrong or water flows down the wall. Damaged floors need to be repaired and repaired. The rain pipe must extend from ground level to the outer gutter and good ventilation in cavity walls and rooms.

We maximized property potential, enhancing quality and returns within a tight budget. By converting the existing structure into modern, desirable flats, we generated substantial rental income and significantly increased market value. Despite COVID-19 challenges, our efficient team completed the project within five months, surpassing client expectations and yielding over 0.5M profit.